Submersible mixer for sewage treatment

The submersible mixer is a key equipment in the sewage treatment process adjustment tank, which can achieve the process requirements for the homogenization and flow of the solid-liquid two-phase flow of the sewage in the adjustment tank during the biochemical process, and is suitable for the occasion of solid-liquid mixing.

There are various submersible mixers currently on the market, but most of them have the defect of inconvenient installation and disassembly. Many existing submersible mixers need to drain the sewage in the pool during installation, and the installation structure is complicated, which not only affects the efficiency of sewage treatment, but also the submersible mixer The installation speed is also slow, which reduces the speed of the entire factory workflow. Once the submersible mixer fails and needs to be replaced, it is very inconvenient to carry out cumbersome installation steps. Therefore, a submersible mixer for sewage treatment appears NS.

This kind of submersible mixer for sewage treatment has the advantages of convenient installation and disassembly, and it solves the problems of many submersible mixers that need to discharge the sewage in the pool during installation, and the installation structure is complicated, the sewage treatment efficiency is low, and the maintenance and replacement are inconvenient when it fails.

This submersible mixer for sewage treatment has the following characteristics:

1. The submersible mixer for sewage treatment can slide up and down in the chute through the setting of the sliding plate on the pillar. When installing, align the limit holes on the two connecting plates with the horizontal Rod, move the connecting plate to slide in the movable groove in the support plate, thereby shortening the distance between the two connecting plates, insert the crossbar into the limit hole, and then insert the four fixing bolts on the front and back into the slide plate In the fixing hole on the connecting plate, the slide plate and the connecting plate are penetrated and fixed together, thereby fixing the entire submersible mixer body on the sliding plate, and then manipulating the rotating motor on the reel to make the rope lengthen, and the submersible mixer The main body is driven by gravity to move the support plate down, so that the slide plate moves down in the chute. The entire installation process only needs to be operated on the standing platform, which achieves the purpose of convenient installation.

2. The submersible mixer for sewage treatment uses the motor on the reel and the pulling force of the rope to make the submersible mixer hang on the pillar and fix it. When it needs to be disassembled, the motor on the reel can be controlled to reverse. The rope is retracted, and the supporting pulley acts as a fulcrum in the middle. The rope pulls up the crossbar, and the crossbar drives the sliding plate and the connecting plate to move up synchronously. At the same time, the guide wheel rolls in the guide groove, making the sliding friction of the sliding plate smaller. After the body of the submersible mixer is lifted up, untie the connection between the rope and the crossbar, remove the fixing bolts, and slide the connecting plate in the movable groove to make the connecting plate separate from the crossbar, and then the submersible mixer body can be disassembled to achieve For the purpose of facilitating disassembly.