[Picture] Selection principle and installation diagram of submersible mixer

The selection of a submersible mixer is a relatively complicated task. The correct selection directly affects the normal use of the equipment. The principle of selection is to let the mixer fully perform its mixing function in a suitable volume. Generally, the flow rate can be used. Sure.

According to the different process requirements of the sewage treatment plant, the optimal flow rate of the mixer should be guaranteed between 0.15-0.3m/s, if the flow rate is lower than 0.15m/s, the plug flow mixing effect will not be achieved, and the flow rate exceeding 0.3m/s It will affect the quality of the process effect, such as: suspended solids content, viscosity, temperature, PH value; there are also factors such as the shape of the pool and the depth of the water.

The matching power required by the submersible mixer is determined according to the volume, the density of the mixer body and the mixing depth, and one or more mixers are used according to the specific situation.

In order to ensure that the operation of the submersible mixer in different pools achieves high efficiency and energy saving effects, the following typical installation forms can be referred to. Mixing mixer series (Note: If used in a regular pool type, it is recommended to stagger the arrangement face to face)

Installation form of submersible mixer