TEL:158-5772-7166CHINESEENGLISH
PRODUCT

QJB submersible mixer

Stainless steel submersible mixer
  • Stainless steel submersible mixer

PRODUCT NAME:

Stainless steel submersible mixer

PRODUCT SERIES:QJB submersible mixer CONTACT PERSON:Mr. Jin PHONE:15857727166,13806830656 E-MAIL:84632643@qq.com TEL:15857727166,13806830656 FAX:0577-67952187
PRODUCT DETAILS

use

   QJB series submersible mixers and QJT series submersible thrusters are successfully developed on the basis of the introduction of the Swedish Flygt submersible motor sealing technology. After years of practice and exploration, two series of products have been formed, mixing mixing and low-speed push flow. Because of its innovations in type, structure and test methods, the overall performance of the product has reached the level of similar products.


2. Structural features

  The mixing and mixing series products use multi-pole motors and adopt a direct-connected structure, which has low energy consumption and high efficiency; the impeller is formed by precision casting or stamping, with high precision, large thrust, beautiful and smooth appearance, and compact structure.

   low-speed push-flow series products adopt cycloidal pinwheel reducer, equipped with small power, low speed, large impeller diameter, and wide service area. The impeller is made of polyurethane material and aluminum alloy. It has high strength and strong corrosion resistance. In addition to the function of stirring, it also has the function of pushing and creating water flow.

  The motor winding of the submersible mixer is F grade insulation, and the protection grade is IP68. Used in conjunction with the aeration system of the sewage plant, the energy consumption of the system can be greatly reduced, and the oxygenation capacity can be significantly increased, which can prevent precipitation. According to process requirements, direct-connected submersible mixing can be equipped with a deflector. QJB type submersible mixer QJT low-speed push-flow series mixer

Technical performance table of QJB submersible mixer

Mixer model

rated power

Rated current

Diameter of impeller

Impeller wheel speed(r/min)

weight(kg)

(kw)

(A)

(mm)

Casting mixer

QJBO.85/8-260/3-740/C/S

0.85

4

260

740

55

QJB1.5/6-260/3-960/c/s

1.5

4

260

960

55

QJB2.2/8-320/3-740/c/s

2.2

5.9

320

740

110

QJB4/6-320/3-960/c/s

4

10.3

320

960

115

QJB5.5/4-670/3-295/c/s

5.5

11.3

670

295

350

QJB7.5/4-670/3-330/c/s

7.5

15

670

330

360

QJB11/4-790/3-303/c/s

11

23.4

790

303

400

QJB15/4-790/3-360/c/s

15

29.7

790

360

410

Punch mixer

QJB1.5/8-400/3-740/s

1.5

4.4

400

740

100

QJB2.5/8-400/3-740/s

2.5

7

400

740

100

QJB3/8-400/3-740/s

3

8.6

400

740

100

QJB4/12-615/3-480/s

4

18

615

480

184

QJB5/12-615/3-480/s

5

20

615

480

184

QJB7.5/12-615/3-480/s

7.5

28

615

480

229

QJB10/12-615/3-480/s

10

32

615

480

229

Low-speed push-flow mixer

QJB3/2-1100/2-135/P

3

6.4

1100

135

135

QJB1.5/4-1800/2-42/P

1.5

3.6

1800

42

158

QJB2.2/4-1800/2-50/P

2.2

4.9

1800

50

162

QJB3/4-1800/2-56/P

3

6.8

1800

56

162

QJB4/4-1800/2-65/P

4

8.8

1800

65

165

QJB1.5/4-2500/2-36/P

1.5

3.6

2500

36

170

QJB4/4-2500/2-42/P

4

8.8

2500

42

185

QJB5/4-2500/2-56/P

5

11

2500

56

185

install the system

  The special installation system of the submersible mixer can quickly install and disassemble the submersible mixer without draining the sewage in the pool.

   It is recommended to use installation system I when the pool depth H is less than 4 meters. The diving depth of the submersible mixer can be adjusted in the vertical direction as required, and the maximum angle that can be rotated around the guide rod in the horizontal plane is ±60°. The base of the lifting system, the support frame and the lower bracket and the relevant connection surface of the pool are all made of expansion bolts Fixed, no need to reserve holes.

   It is recommended to use installation system II when the pool depth H>4 meters, and a concrete foundation (or steel structure base) should be built at the bottom of the pool. The relevant connection surfaces of the lifting system base, the steel rope fixing frame and the guide base and the pool are all fixed with expansion bolts, and there is no need to reserve holes. The installation system II replaces the guide rod with a guide steel rope, which has the characteristics of convenient transportation and simple on-site installation. This system fundamentally avoids the situation that the guide rod is bent and deformed due to transportation, which affects normal use, and changes the phenomenon of abnormal lifting due to the installation error of the guide rod when the pool is too deep. It is more convenient and reliable to operate under the installation conditions with cantilever pool top (as shown in the figure).

   When the customer places an order, please provide the pool depth H and the pool shape diagram so that the manufacturer can determine the size of the guide rod or guide wire during processing. The material of the installation system is made of stainless steel (or carbon steel). In addition to the guide rod or guide wire, and the lifting base in the installation system, multiple mixers can share a set of lifting devices (except for special records required by the user).


Installation Precautions

  ◎The guide rod or guide wire should be vertical to the horizontal, and plumb weight can be used for correction;

  ◎When the hook is lifting the submersible mixer, the end of the impeller should be raised 5°-10° above the horizontal surface

  ◎By adjusting the chain on the lifting device, the lifting hook and the lifting center of gravity of the submersible mixer are on the same vertical line when the submersible mixer slides down the guide rod or guide wire. Installation System I Installation System II The same series of products